Now Reading
What Should You Do When The Connection Between Your Access Point Router Or Cable Modem And The Internet Is Broken?

What Should You Do When The Connection Between Your Access Point Router Or Cable Modem And The Internet Is Broken?

the connection between your access point router or cable modem and the internet is broken

What should you do when the connection between your access point router or cable modem and the internet is broken? Operating on a broadband connection has several advantages: lesser download time, fast connection, and much more. But, at the same time, it has cons as well.

Now, there are various ways to fix the connection between your access point router or cable modem, and the internet is broken, and you must know all. First, you need to understand that this is a Window Networking Troubleshoot Error. Keep in mind. This error can occur on any Windows, and below described are the ways to fix the same.

What Is An Access Point?

What Is An Access PointAn access point is actually a device that produces a wireless LAN in a large area. This point joins the hub, switch, or a wired router to a designated area. 

However, this point is considered better for businesses because it can manage up to sixty connections simultaneously. Furthermore, by activating these points, users can roam freely from one access point to another without losing a connection.

Another benefit of an access point router is that it can be installed anywhere you can run on an Ethernet cable. 

What Is A Cable Modem?

What Is A Cable ModemA cable modem is a kind of network bridge that provides two-direction data communication through radio frequency on a coaxial infrastructure, radio frequency over a glass, and hybrid fiber-coaxial. 

In a more simple term, this modem is used to transform analog data signals to digital form and vice versa. Moreover, the data can be converted into cable lines more quickly than traditional phone lines. 

The best benefit of this modem is that it is always active, yet it is no longer trendy anymore. The other names for this modem are HFC, DOCSIS, CMTS, CATV, CableLabs, modem, etc. 

What Should You Do When The Connection Between Your Access Point Router Or Cable Modem And The Internet Is Broken?

connection between cable modem and internet brokenEvery user loves the faster connections, but the connection between your access point router or cable modem and the internet is broken during working hours. Your whole day is getting spoiled. Your work finishing time is increasing, and you can not complete your work within the deadline.

You can solve the issue in two ways: one is simply called the networking support executive, or open your laptop command prompt and solve the error. But before all these, always check the hardware connections of your PC. After viewing the modem green signal, then process to your next step.

Initially, you need to do a clean boot on your computer and check if the third-party program on the pc is causing this error. On the other hand, the first way to solve the connection between your access point router or cable modem and the internet is by using a command prompt.

Follow these step-by-step processes and sort out the problem at your home.

Step 1:

Click on the Start button on your pc and tap Command Prompt in the search box. Now, you need to select Run as administrator to open the command prompt in the Admin mode. Then you will see a small window opening at the bottom of your screen.

See Also
Reddit Dark mode

Step 2:

From the command prompt, you have to change the network configurations of the adopters, and for these, you have to open the reset network connectivity option from the prompt. Type the Netsh Winsock reset command in the command box. Run this command and click Enter in the command prompt window. 

Step 3:

After you run the command, you will see the successfully reset Winsock catalog option. If this command is showing in the window black screen, you can successfully reset the network configurations. Hence, after one enters the message that does not appear on your screen, perform the command in a series and click Enter again. 

Step4:

When you see the windows/ system 32 option, then insert the command of Ipconfig /release. After you type the command again, press the enter. You can configure two internet connections from these windows: the ethernet adapter and the other one is the LAN adapter. First, make the change in a network configuration as per your requirements, and then after making the change, press the enter.

Step 5:

After following all the steps described above, check the connection between your access point router, cable modem, and internet. Issues must have been fixed. And after the final configurations of the network setting to fix up all tasks and the modifications, always restart your PC once. After your network configurations, if you are still facing the network problem, the PC’s starting is helping you sort out the temporary glitch problem.

The Final Thoughts 

I hope we have cleared your doubt about the ways to fix when the connection between your access point router or cable modem and the internet is broken. When you are using broadband connectivity the temporary network glitch problems are common among the users. If there are no savior hardware problems, you can fix the problem on your own. However, if your issue is still not solved, you can mention them in the comment section below!

You May Also Like: 

0 0 votes
Article Rating
Subscribe
Notify of
guest
0 Comments
Inline Feedbacks
View all comments
Scroll To Top